How much should I budget for a complete vinyl privacy fence around a 5,000 square foot lot in Burnaby?

For a complete 6-foot vinyl privacy fence around a 5,000 square foot lot in Burnaby, budget $8,000 to $18,000 installed, depending on the lot shape, terrain, number of gates, and vinyl product quality. Most Burnaby homeowners with this lot size end up in the $10,000 to $14,000 range for a mid-grade vinyl privacy fence with one or two gates.

Let me break down how that number comes together. A 5,000 square foot lot in Burnaby typically has a perimeter of approximately 200 to 280 linear feet, depending on whether the lot is square, rectangular, or irregular. A perfectly square 5,000 sq ft lot has a perimeter of about 283 feet, while a typical Burnaby rectangular lot (say 50 x 100 feet) has a perimeter of 300 feet — but you rarely fence the entire front, so the actual fenced perimeter is usually 200 to 250 linear feet once you subtract the front lot line and driveway.

At $35 to $70 per linear foot installed for 6-foot vinyl privacy fencing in Metro Vancouver, here is what those linear footage ranges cost:

• 200 linear feet: $7,000 to $14,000
• 225 linear feet: $7,875 to $15,750
• 250 linear feet: $8,750 to $17,500

Add at least one pedestrian gate ($200 to $600 installed) and possibly a double gate or wider access gate ($400 to $900 installed) for lawn equipment or backyard access. Gates are often where homeowners underbudget — a fence without proper gate access is frustrating to live with.

Vinyl product quality drives the cost range more than any other factor. Entry-level vinyl fencing uses thinner walls and may lack UV stabilizers, costing $35 to $45 per linear foot installed. These products carry shorter warranties (10 to 15 years) and may yellow or become brittle within a decade in direct sun exposure. Mid-grade vinyl with reinforced posts and rails, UV protection, and 20 to 25 year warranties runs $45 to $55 per linear foot. Premium vinyl with aluminum-reinforced posts and rails, lifetime warranty, and superior UV and impact resistance costs $55 to $70 per linear foot. For a fence you want to last 25 to 30 years in Burnaby's climate, mid-grade or better is the smart investment.

Burnaby-specific considerations that can affect your budget include terrain and access. Many Burnaby properties have sloped yards, particularly in areas like Burnaby Mountain, Capitol Hill, and the Brentwood to Hastings corridor. Fencing on slopes requires either stepped panels (stair-stepping each section) or racked panels (angling the panels to follow the grade). Both add complexity and cost — expect a 15 to 25 percent premium for sloped installations over flat-grade work. Properties with difficult access — rear yards only reachable through the house or down steep paths — also cost more due to manual material carrying.

Old fence removal is another common cost that homeowners overlook. If you are replacing an existing wood or chain-link fence, removal and disposal adds $3 to $8 per linear foot. For 200 linear feet, that is $600 to $1,600 on top of the new fence cost.

Burnaby follows standard Metro Vancouver fence bylaws — maximum 1.83 metres (6 feet) in rear and side yards and 1.22 metres (4 feet) in front yards. Vinyl privacy fencing at 6 feet falls within the limit and typically does not require a building permit. However, if your property is strata, you must get council approval before any fence work, even within your lot boundaries.

To get an accurate budget for your specific Burnaby lot, I recommend getting three written quotes from experienced fence contractors who can assess your property's terrain, access, soil conditions, and existing fence situation. Vancouver Fence Builders can match you with local fence professionals for free estimates.

---

Find a Fencing Contractor

Vancouver Fence Builders connects you with experienced contractors through the https://vancouverconstructionnetwork.com:

• PURE Design Inc ✓
• True North Strong Contracting Ltd ✓
• Adept Projects Inc ✓

View all fencing-decks contractors →